How do I force Windows to boot into BIOS?

How do I force Windows 10 to boot from BIOS?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How do I force Windows to boot?

Press Windows key + R (force Windows to start into safe mode every time you reboot the PC)

  1. Press the Windows Key + R.
  2. Type msconfig in the dialog box.
  3. Select the Boot tab.
  4. Select the Safe Boot option and click Apply.
  5. Choose Restart to apply the changes when the System Configuration window pops up.

How do I fix BIOS not booting?

If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS:

  1. Turn off all peripheral devices connected to the computer.
  2. Disconnect the power cord from the AC power source.
  3. Remove the computer cover.
  4. Find the battery on the board. …
  5. Wait one hour, then reconnect the battery.
THIS IS IMPORTANT:  Your question: How do I enable USB ports blocked by administrator?

How do I boot into BIOS without rebooting?

How to enter BIOS without restart the computer

  1. Click >Start.
  2. Go to Section >Settings.
  3. Find and open >Update & Security.
  4. Open the menu >Recovery.
  5. In the Advance startup section, select >Restart now. …
  6. In recovery mode, select and open >Troubleshoot.
  7. Select >Advance option. …
  8. Find and select >UEFI Firmware Settings.

How do I fix Windows not booting?

Windows 10 Won’t Boot? 12 Fixes to Get Your PC Running Again

  1. Try Windows Safe Mode. …
  2. Check Your Battery. …
  3. Unplug All Your USB Devices. …
  4. Turn Off Fast Boot. …
  5. Check Your Other BIOS/UEFI Settings. …
  6. Try a Malware Scan. …
  7. Boot to Command Prompt Interface. …
  8. Use System Restore or Startup Repair.

How do I enable UEFI boot?

Enable UEFI – Navigate to General -> Boot Sequence using the mouse. Select the small circle next to UEFI. Then click Apply, then OK on the menu that pops up, and then click exit. This will reboot your computer.

How do I open the boot menu in Windows 10?

I – Hold the Shift key and restart



This is the easiest way to access Windows 10 boot options. All you need to do is hold down the Shift key on your keyboard and restart the PC. Open up the Start menu and click on “Power” button to open power options. Now press and hold the Shift key and click on “Restart”.

Does F8 work on Windows 10?

First, you have to enable the F8 key method



On Windows 7, you could press the F8 key as your computer was booting to access the Advanced Boot Options menu. … But on Windows 10, the F8 key method doesn’t work by default. You have to manually enable it.

THIS IS IMPORTANT:  How do I clone my operating system to another drive?

Can you fix a corrupted BIOS?

A corrupted motherboard BIOS can occur for various reasons. The most common reason why it happens is due to a failed flash if a BIOS update was interrupted. … After you are able to boot into your operating system, you can then fix the corrupted BIOS by using the “Hot Flash” method.

Why is my computer not booting up?

Common boot up issues are caused by the following: software that was installed incorrectly, driver corruption, an update that failed, abrupt power outage and the system did not shut down properly. Let’s not forget registry corruption or virus’ / malware infections that can completely mess up a computer’s boot sequence.

Does CMOS battery stop PC booting?

Dead CMOS would not really cause a no-boot situation. It simply helps store BIOS settings. However a CMOS Checksum Error could potentially be a BIOS issue. If the PC is literally doing nothing when you press the power button, then it could even be PSU or MB.

Operating system reviews