How do I reset my bios to factory settings?

Can you reset BIOS to factory settings?

Resetting the BIOS



Once you’re in BIOS, you can try to hit either the F9 or F5 keys to bring up the Load Default Options prompt. Clicking Yes will be enough to restore the default settings. This key may be different depending on your BIOS, but it’ll usually be listed at the bottom of the screen.

Is it safe to reset BIOS to default?

It is safe to reset the BIOS to default. Most often, resetting the BIOS will reset the BIOS to the last saved configuration, or resets your BIOS to the BIOS version that shipped with the PC. Sometimes the latter can cause issues if settings were changed to take account for changes in hardware or OS after install.

How do I reset my BIOS settings to default without display?

NEVER boot your system back up with the jumper on pins 2-3 NEVER! You must power down move the jumper to pins 2-3 wait a few seconds THEN move the jumper back to pins 1-2. When you boot up you can then go into the bios and select optimized defaults and change what ever settings you need from there.

THIS IS IMPORTANT:  Quick Answer: How do I change my background on Windows 10 without administrator?

How do I factory reset my computer with command prompt?

The instructions are:

  1. Turn on the computer.
  2. Press and hold the F8 key.
  3. At the Advanced Boot Options screen, choose Safe Mode with Command Prompt.
  4. Press Enter.
  5. Log in as Administrator.
  6. When Command Prompt appears, type this command: rstrui.exe.
  7. Press Enter.
  8. Follow the wizard instructions to continue with System Restore.

How do I remove a BIOS password?

Reset BIOS Password

  1. Enter the BIOS password (case sensitive)
  2. Press F7 for Advanced Mode.
  3. Select the ‘Security’ tab and ‘Setup Administrator Password’
  4. Enter and confirm your new password, or leave this blank.
  5. Select the ‘Save & Exit’ tab.
  6. Select ‘Save Changes and Exit’, then confirm when prompted.

What happens if I reset BIOS to factory settings?

Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.

What happens when you restore BIOS to factory settings?

A BIOS reset will erase BIOS settings and return them to the factory defaults. These settings are stored in non-volatile memory on the system board. This will not erase data on the system drives.

How do I fix corrupted BIOS?

You can do this one of three ways:

  1. Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so. …
  2. Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard. …
  3. Reset the jumper.
THIS IS IMPORTANT:  Your question: How do I disable BIOS mode?

How do I reset my UEFI BIOS?

How do I reset my BIOS/UEFI to default settings?

  1. Press and hold the power button for 10 seconds, or until your system shuts completely down.
  2. Power on the system. …
  3. Press F9 and then Enter to load the default configuration.
  4. Press F10 and then Enter to save and exit.
Operating system reviews