How do I reset my Dell BIOS to default?

How do I reset my Dell BIOS to default settings?

On the BIOS (System Setup) screen, click Restore Settings or Load Defaults (whichever is listed). Make sure BIOS Defaults is selected or confirm to load the defaults (when offered) and click OK. Click Exit. Confirm exiting, when offered.

Can you reset BIOS to default?

Resetting the BIOS

Once you’re in BIOS, you can try to hit either the F9 or F5 keys to bring up the Load Default Options prompt. Clicking Yes will be enough to restore the default settings. This key may be different depending on your BIOS, but it’ll usually be listed at the bottom of the screen.

How do I change BIOS settings?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

What are default BIOS settings?

Your BIOS also contains a Load Setup Defaults or Load Optimized Defaults option. This option resets your BIOS to its factory-default settings, loading default settings optimized for your hardware.

THIS IS IMPORTANT:  Question: What does the BIOS do during boot up?

How do I reset my BIOS settings?

[Motherboards] How can I restore BIOS settings?

  1. Press Power to turn on the motherboard.
  2. During POST, Press <Del> key to enter the BIOS.
  3. Go to Exit Tab.
  4. Select Load Optimized Defaults.
  5. Press Enter to default settings.

How do I reset my BIOS?

How to reset BIOS settings on Windows PCs

  1. Navigate to the Settings tab under your Start menu by clicking the gear icon.
  2. Click the Update & Security option and select Recovery from the left sidebar.
  3. You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready.

How do I get to advanced BIOS settings?

Boot up your computer and then press the F8, F9, F10 or Del key to get in to BIOS. Then quickly press the A key to show the Advanced settings.

How do I change my BIOS settings without rebooting?

How to enter BIOS without restart the computer

  1. Click >Start.
  2. Go to Section >Settings.
  3. Find and open >Update & Security.
  4. Open the menu >Recovery.
  5. In the Advance startup section, select >Restart now. …
  6. In recovery mode, select and open >Troubleshoot.
  7. Select >Advance option. …
  8. Find and select >UEFI Firmware Settings.

How do I fix corrupted BIOS?

You can do this one of three ways:

  1. Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so. …
  2. Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard. …
  3. Reset the jumper.
THIS IS IMPORTANT:  How do you zip a file in Unix?

How does a BIOS get corrupted?

A corrupted motherboard BIOS can occur for various reasons. The most common reason why it happens is due to a failed flash if a BIOS update was interrupted. … After you are able to boot into your operating system, you can then fix the corrupted BIOS by using the “Hot Flash” method.

Operating system reviews