Question: How do I access my BIOS Windows 8?

How do I open BIOS on Windows 8?

[Windows 8] How to enter the BIOS configuration of Windows 8?

  1. Click “Settings”.
  2. Click “Change PC settings”.
  3. Click “General” -> Select “Advanced startup” -> Click “Restart now”. …
  4. Click “Troubleshoot “.
  5. Click “Advanced options”.
  6. Click “UEFI Firmware Settings”.
  7. Click “Restart”.

How do I enter Windows BIOS?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How do I get into BIOS on my desktop?

Method 2: Use Windows 10’s Advanced Start Menu

  1. Navigate to Settings.
  2. Click Update & Security.
  3. Select Recovery in the left pane.
  4. Click Restart now under the Advanced startup header. Your computer will reboot.
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Click UEFI Firmware Settings.
  8. Click Restart to confirm.
THIS IS IMPORTANT:  How do I list files from a specific date in Unix?

How do I get into BIOS on Windows 8.1 HP?

Press the power button to turn on the computer, then immediately press Esc repeatedly, about once every second, until the Startup Menu opens. Press F10 to open BIOS Setup.

What is the BIOS key for Windows 8?

F12 key method

  1. Turn the computer on.
  2. If you see an invitation to press the F12 key, do so.
  3. Boot options will appear along with the ability to enter Setup.
  4. Using the arrow key, scroll down and select <Enter Setup>.
  5. Press Enter.
  6. The Setup (BIOS) screen will appear.
  7. If this method does not work, repeat it, but hold F12.

How do I fix Windows 8 not booting?

Table of Contents:

  1. Operating System.
  2. Specific Windows 8 No Boot Issues.
  3. Verify the Computer Finishes Initial Power-Up (POST)
  4. Unplug All External Devices.
  5. Check for Specific Error Messages.
  6. Reset the BIOS to Default Values.
  7. Run a Computer Diagnostic.
  8. Boot Computer to Safe Mode.

How do I get into UEFI without BIOS?

Type msinfo32 and press Enter to open the System Information screen. Select System Summary on the left-hand side pane. Scroll down on the right-hand side pane and look for the BIOS Mode option. Its value should either be UEFI or Legacy.

How can I enter BIOS without keyboard?

How to enter bios without keyboard

  1. Press the Reset CMOS button. Not all motherboards have such a button, so this won’t always be an option.
  2. Change the setting on the Reset CMOS jumper. …
  3. Remove the motherboard battery, leave it out for a few seconds, and put it back in.
THIS IS IMPORTANT:  Your question: Can you change BIOS software?

How do I install Windows in UEFI mode?

How to install Windows in UEFI mode

  1. Download Rufus application from: Rufus.
  2. Connect USB drive to any computer. …
  3. Run Rufus application and configure it as described in the screenshot: Warning! …
  4. Choose the Windows installation media image:
  5. Press Start button to proceed.
  6. Wait until completion.
  7. Disconnect the USB drive.

What are the 3 common keys used to access the BIOS?

Common keys used to enter BIOS Setup are F1, F2, F10, Esc, Ins, and Del. After the Setup program is running, use the Setup program menus to enter the current date and time, your hard drive settings, floppy drive types, video cards, keyboard settings, and so on.

How do I change BIOS settings?

How Do I Completely Change the BIOS on My Computer?

  1. Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
  2. Press the key or combination of keys to access your computer’s BIOS.
  3. Use the “Main” tab to change the system date and time.

How do I get into the BIOS in Windows 10?

F12 key method

  1. Turn the computer on.
  2. If you see an invitation to press the F12 key, do so.
  3. Boot options will appear along with the ability to enter Setup.
  4. Using the arrow key, scroll down and select <Enter Setup>.
  5. Press Enter.
  6. The Setup (BIOS) screen will appear.
  7. If this method does not work, repeat it, but hold F12.
Operating system reviews